V4 Deco Parquet, Silver Haze Engineered Oak Flooring, Rustic, Stained, Brushed & Hardwax Oiled, 90x15x360mm

Price On Request
1 pack of this flooring covers 1.8144 sqm


This flooring product offers a Tongue & Groove fitting system, making it suitable for nail-down or glue-down installations. This product is suitable for Underfloor Heating.

Order a Free Sample


Try before you buy! Order a free sample of this product.
Free samples are subject to current availability and usually dispatched within 48 hours by Royal Mail. The size of this sample is up to 20mm.

Order a Sample


Try before you buy! Order a sample of this product.
Samples are subject to current availability and usually dispatched within 48 hours by Royal Mail. The price of this sample cost £4. The size of this sample is up to 200mm.

Description

V4 Deco Parquet, Silver Haze Engineered Oak Flooring, Rustic, Stained, Brushed & Hardwax Oiled, 90x15x360mm can be installed fully bonded over any subfloor including importantly, those with underfloor heating systems. 

Unlike traditional parquet block, this floor is engineered with a bevel-edged European Oak wear layer which is bonded to a hardwood ply base. This allows for versatile installations that can be bonded to any flat surface including those with underfloor heating systems.

This floor is finished with coats of hard wax oil which keeps the hardwood surface protected from stains and wear whilst maintaining a natural look and feel.

Flooring must not be exposed to excessive heat such as from hot water pipes below floors. The subfloor is key to a successful installation and will help ensure your floor performs to its very best. The subfloor is likely to be either wooden or a cement-based screed.

It is finished with coats of hard wax oil which keeps the hardwood surface protected from stains and wear whilst maintaining a natural look and feel.

Engineered wood flooring may be installed as a floating floor, which means that the boards are joined together and loose laid over the subfloor instead of being fully bonded with adhesive or secret nailed.

V4 Wood Flooring is chosen for its natural beauty, therefore grading criteria is always an approximation as every piece of timber is different. Engineered wood flooring may be installed directly to concrete or sand-cement screed sub-floors, or to suitable wood-based sub-floors by fully-bonding with a purpose-made permanently flexible adhesive.

To achieve the desired mix of colours, shades and other characteristics in the final floor, and to avoid clusters of characteristics such as knots, the contents of multiple packs should be mixed during installation.

Avoid grouping similar colours and grain pattern by not mixing the planks before installation areas of dark and light planks can look patchy and out of place.

1 pack contents: 56 Universal Blocks

Specifications

Wood Floor Specification
Width 90 mm
Thickness 15 mm
Wood Type Oak
Top Layer 4 mm
Grade Rustic
Sealant Finish Oiled
Texture Brushed
Profile Bevelled Edge
Origin European Oak
Length 360 mm
Joint System Tongue and Groove
Pattern Herringbone
ZB103 ZB103